Exam at a glance

Credential
General Journeyman Electrician (J)
Format
52 questions in 3 hours, open book
Passing score
75% or higher
Scheduling window
Take the exam within 60 days of the BCD authorization letter
Retake wait
30 days after a failed exam
Oregon installation code
2026 OESC, effective October 1, 2026

Choose the application route your records support

Start with the General Journeyman Electrician (J) row of the Oregon Building Codes Division (BCD) application. It lists three routes: an approved Oregon apprenticeship, 576 classroom hours with 8,000 hours of out-of-state experience, or 16,000 hours of out-of-state experience. The classroom route requires an official transcript and at least 1,000 hours each in residential, commercial and industrial work. The experience-only route calls for at least 2,000 hours in each of those categories.

Both out-of-state routes are subject to BCD’s 300% rule. The application illustrates the rule with the 1,000-hour residential minimum: up to 3,000 residential hours can count. Break down your hours by employer and work category before submitting. BCD asks for one verification form per employer, with duties described by category. A single number on a letterhead gives BCD less to work with than a signed breakdown, especially when one employer assigned you to multiple types of projects.

Choose a testing location you can actually use

Select your location when you apply. After approval, BCD mails a Letter of Authorization with the site’s contact details and list of approved materials. Call the chosen site to make your appointment. The exam must take place within 60 days of the letter date, and BCD says a location change after authorization requires paying the license fee again for a new letter.

The J listing gives you three hours for 52 open-book questions. BCD grades the exam and mails the results. Plan on roughly two weeks to receive them. On a failure, BCD sends a strength and weakness report and a reapplication form. You must wait 30 days after each failure to retest. Use that gap to drill the topics from the report with the same reference setup you had at the exam.

Pair the codebook with Oregon’s amendment table

BCD’s Electrical Code Program says the 2026 Oregon Electrical Specialty Code took effect October 1, 2026. It consists of the 2026 NEC and Oregon’s amendment table, which the agency supplies separately. The public exam-materials sheet lists the NEC with Oregon amendments and errata without naming an NEC edition. Check the material list that comes with your authorization and confirm the exam edition with BCD if the letter leaves it open. This lets you assemble a matching NEC and amendment table before buying or marking either.

BCD’s public list also includes the NEC Handbook, ORS chapter 479, OAR division 918, several published indexes and electrical references, and a silent, nonprinting, nonprogrammable calculator. The preparation rules allow tabs, highlighting and handwritten margin references to another code provision or an applicable amendment. Keep practice questions, worked examples and added pages out of the books you bring, except the published errata BCD allows. Take the references you can locate and use quickly.

Practice the lookup that Oregon adds

Work in pairs. First solve a base NEC question by finding the section or table. Then take that same section number to Oregon’s amendment table and determine whether the state changes the provision. Write down which source controls your final answer. Use the same routine for several wiring method, service, and grounding examples. Give yourself separate questions on licensing and scope so you learn to recognize a reason to start in ORS or OAR.

Try a lookup in the 2026 Table 1-E using NEC 90.4(C) as your starting point. Read the Oregon language about written requests and written approval before work begins. Then find the table’s introductory note explaining the treatment of NEC language that does not appear in the amendment table. Repeat the drill using the table for your confirmed exam edition. This practice teaches you both to capture an Oregon change and to stop searching when the base NEC still governs.

Set a 45-minute timer for a 13-question practice block, which matches the official average pace. Give yourself one pass for familiar topics and use the saved time for questions requiring a second lookup. At the end, write the first reference you tried, where you found the controlling text, and which exception or condition mattered. If you consistently run out of time on calculations, rehearse the order of steps and locating the governing table before you repeat the timed block.

Prepare for your appointment

  • Verify the J route shown on the electrical application and request the supporting records.
  • Check employer hour breakdowns against the required categories and caps.
  • Choose an exam site you can reach and take the exam within the authorization window.
  • Confirm the NEC edition and match it to the Oregon amendment table.
  • Rehearse a timed practice block with only the approved reference setup.

Save this checklist in your study plan

Try a question

You are applying with a 576-hour transcript and expect to count all 4,200 hours in the residential category. How many of those hours can Oregon credit to that category?

Show the answer

Up to 3,000.

The application gives residential work a 1,000-hour minimum for this route. Three times that minimum is 3,000, so you still need enough qualifying hours across the other required categories to reach the total.

Sources